Requirements For The Production Process Of Protective Coveralls

1 Basic stitching:

Lockstitch closed access control design; one-piece three-piece cap design; elastic shrink waist; shrink cuffs;

The production and stitching of protective coveralls are inseparable from the sewing machine. The tightness of the thread and the fineness of the needle pitch are related to the final effect. It can meet the stitching, zipper, Velcro, elastic, and other processes in protective clothing.

2. Zipper, Velcro

Medical protective clothing is usually designed with a closed placket, that is, the inner zipper is closed, the outer placket is glued, and the zipper and Velcro are attached through the flat seam. In addition to making it easier to put on and take off, this design allows for a tighter fit.

3 Elastics on cuffs, ankles, hats

In order to make the medical protective clothing fit better, the cuffs, ankle openings, and hats are all designed with elastic closures, and the adjustable computer overlock sewing machine (with an external elastic device) adopts elastic closures. The purpose is to strengthen the protective clothing and other When the protective equipment is matched, the tightness is higher, and it also prevents dust or liquid from entering the interior from there. Closed sleeves, closed trousers legs, closed hat can use the adjustable computer overlock sewing machine.

4 Waist compression elastics

In order to facilitate movement and work and provide better flexibility for wearing, the waist of protective clothing is usually tightened with elastic elastics through a lockstitch machine to increase work efficiency and use safety.

In order to facilitate movement and work and provide better flexibility for wearing, the waist of protective clothing is usually tightened with elastic elastics through a lockstitch machine to increase work efficiency and use safety.

5 Adhesive tape

In addition to the above designs, the reason why protective clothing can achieve such a high degree of sealing is inseparable from this most important step. After the lathe sews the protective clothing, it is necessary to seal all the stitches and pinholes in the protective clothing through the glue machine to prevent dust or liquid from entering the sewing pinholes and enhance the isolation performance and use of the protective clothing. Safety.

For more information, please continue to pay attention to our custom outdoor protective cover manufacturer.