The Role Of Motorcycle Covers In Life

The vast majority of motorcycle outer covers are made of ABS plastic products. Although the appearance is beautiful and exudes a strong modern atmosphere, after some motorcycles have been used for a long period of time, the paint film on those outer surfaces that are directly irradiated by strong light tends to deteriorate. Cracks appear (such as the head of the scooter, the upper part of the rear trunk, and both sides, etc.). The main factors that affect the cracking of the paint film of ABS plastic products are an improper selection of casting molding process parameters, lack of strict treatment, and improper use. The cover can protect the motorcycle to a certain extent, so let us take a look with Zhejiang Mingfeng Car Covers Manufacturers~

In winter, the temperature in many areas is below 0°C. Motorcycles are used under low-temperature conditions, which may easily cause problems such as difficulty in starting the engine, increased fuel consumption, and increased wear and tear of parts. It can also do a lot of damage. If the motorcycle is parked in the open air below 0°C for a long time, cracks will occur in the entire depth of the ABS plastic parts, and it will be completely brittle below -40°C. Therefore, motorcycles should be stored indoors as much as possible. If there is no condition to store them outdoors, they should be covered with prefabricated panels to prevent moisture intrusion. It is best to put on a motorcycle cover to keep them warm. Remove the motorcycle cover to repel moisture.

In the coming summer, the temperature on the road can reach as high as 40-50°C. Under the action of strong sunlight, strong ultraviolet rays,  and high heat, ABS plastic products are prone to aging and become hard and brittle, resulting in serious cracking. Therefore, you should try your best to avoid leaving the car at noon. When you don’t use the motorcycle, you should try to store it indoors or under the shade of a tree. Never park the motorcycle in strong sunlight for a long time. This will make the paint film dry and crack. It is best to put on a motorcycle cover to prevent ultraviolet rays from damaging the motorcycle. In addition, be careful not to place the car in high-temperature places such as stoves, resistance furnaces, and open flames. Remember to touch, scratch, or press the painted surface with hard objects. Because the paint film will be deformed by tension after bumping and pressing, which will easily cause cracks, so avoid prolonged rain. Long-term rain will cause the varnish to swell, age, and fall off, becoming a "painted face". After driving in the rain, it should be cleaned in time; when parking the vehicle, it should be placed in a cool place that can avoid the rain.